旭崇自动化设备有限公司为您主要提供偏光片撕膜机,CG贴合机,贴合机厂家等相关的展示和信息更新,欢迎您的收藏。

旭崇 (自动对位)精密点胶机 XCD77-A8

文章出处:http://hb.sunsom.cn/news686876.html发布时间:2019-07-31 00:00:00

旭崇 (自动对位)精密点胶机  XCD77-A8

(Auto-alignment) Dispensing M/C   XCD77-A8

 

设备用途 Application

1 本设备用于各种高粘度UV水胶点胶工艺。

2 广泛应用于:各种液晶屏、触摸屏、点胶生产工艺。

 

1. The machine is used for dispensing all kinds of high viscosity UV.

2. Widely used in dispensing process of LCD, TOUCH SCREEN during production.

 

 

产品细节   Details

人机操作界面  Operating Interface

光栅保护机构  Grating Protection

防尘检测组   Group of Dust Detecting

X-Y-θ对位平台   Platform

UV预固装置   Group of UV Solidifying

机器人示教器  Flex Pendant

操作控制按钮  Operating Button

自动对位系统  Auto-alignment System

激光位移传感器  Displacement Sensor

 

产品介绍

1 人工将擦拭干净Glass 放入自动对位平台上,按下真空按钮;

2 自动对位平台移载到拍照位,拍照OK后,平台自动校正好;

3 自动对位平台移载到测高位,激光位移传感器测量Glass 高度位;

4 自动对位平台移载到点胶起始位,Z轴下降(根据激光位移传感器测量的产品高度差异自动调整Z轴下降的高度),点胶阀打开;

5 自动对位平台按照设定的图形走位,点胶完成,点胶阀关闭,Z轴上升;

6 自动对位平台回到待机位,平台真空电磁阀关闭,人工下料,下一片重复以上动作;

7 本设备用于各种高粘度UV水胶点胶工艺。——这点不是设备用途里面已经有了

 

1. Put clean glass onto platform and press vacuum button;

2. Platform moves to photographing area, photographing OK, platform will correct automatically;

3. Platform moves to right position where displacement sensor measures the height of glass;

4. Platform moves to starting dispensing position, Z-axis moves down according to the height measured by displacement sensor, dispensing valve standby;

5. Platform moves according to the setting graphics, dispensing valve off and Z-axis moves up after dispensing finished;

6. Platform goes back to standby position and vacuum off, discharge products, repeats the above action.

 

产品参数 Parameter

输入电源:220V 50-60HZ

Input Power: 220V 50-60HZ

额定功率:3.5KW

Rated Power: 3.5KW

工作气压:0.5-0.7Mpa,干燥气源

Working Pressure: 0.5-0.7Mpa, dry air

编辑模式:机器人示教器

Editing Mode: Flex Pendant

重复精度:±0.005mm/Axis

Precision: ±0.005mm/Axis

安全防护:静电防护+光栅保护+漏电保护

Safety Protection: ESD protection + grating protection + leakage protection

点胶机构:抱闸伺服电机控制点胶头上下运动

Dispensing Group: Contracting brake servo motor controlling

LCD载台:X-Y-θ自动对位

Platform: X-Y-θ auto alignment

程序控制:汇川PLC

Controlling Program: PLC

外型尺寸:L850mm*W1000mm*H1750mm (不含FFU)

Dimension: L850mm*W1000mm*H1750mm (exclude FFU)

程序记录容器:至少5000组

NO. of Program Recording: At least 5000 sets

设备重量:350KG

Weight of Machine: 350KG

 

 

功能特点

1 人机界面便捷设定和显示各项参数;如平台进出速度,点胶时间,真空值,真空设定区域等。

2 安全光栅对操作人员起一定保护作用。

3 防尘检测组,玻璃真空吸附在贴合前,通过检测灯可再次检查确认尘点保证品质。

4 平台采用XYθ三轴自动控制确保设备点胶精度。

5 确保UV快速固化确保点胶效率。

6 点胶控制系统通过机器人示教器可设置点,线,圆弧等多种图形及自动存储程序。

7 对常用功能使用按键操作,使用双启动开关,有效保护误操作启动。

8 采用1组CCD镜头自动对位,采用法视特自动对位系统。

9 激光位移传感器测高并自动补偿确保点胶高度一致。

 

1. Operating interface is convenient to set and indicate all kinds of parameter, such as platform moving speed, dispensing time, vacuum value and area.

2. Grating protection can prevent operator from injuries.

3. Group of dust detecting will checking dust before dispensing to assure the quality.

4. Platform adopted X-Y-θ three axis automatic controlling to guarantee dispensing accuracy.

5. Group of UV solidifying helps UV solidify quickly and guarantees dispensing efficiency.

6. The machine can set points, lines, arcs and other graphics through flex pendant and can store graphics automatically.

7. Using button operation for common functions, and the ways of press double “start” button to operate can avoid operating in wrong ways.

8. Automatic alignment of 1 groups of CCD lenses is adopted, and automatic alignment system is adopted.

9. Displacement Sensor measures height and make up a deficiency according to actual height to ensure that dispensing the same height.

 

工艺流程  Process

放置产品  Put Product

点胶  Dispensing

点胶完成  Dispensing Finished

 

辅料  Accessories

无尘布  Dust-free Cloth

酒精 Ethanol

棉棒 Cotton Swab